Oil-Only Static-Dissipative Pads

$19.99
SKU:
WPX25H
Buy Now

Description

Specifications

Dimensions - 19" L x 15" W
Sold as - 25 pads per package
Color - White
Composition - Polypropylene
Absorbency - Up to 8.4 gal. per package
Absorbency per - Up to 43.01 oz. per pad
# per Pallet - 120
Basis Weight - HeavyWeight
Incinerable - Yes

screen-shot-2012-03-09-at-4.36.09-am.png

Color: White

Product Features:

MeltBlown Mat Pads in easy-to-identify packaging are specially treated to dissipate static for safer absorption of volatile fuels and other petroleum-based liquids.

Specially Treated Mat in Easy-to-Identify Packaging

Ideal for absorbing volatile fuels in cold applications, dry, low-humidity areas or anywhere that the potential for sparking exists. Static-Dissipative Mat comes in a blue wrapper for quick identification when you need Mat where static electricity poses a risk.

Fast-Wicking

Loose stacked-weave design increases surface area on spill. Mat starts wicking on contact to save time in critical situations. Works equally well on land or water — it even floats when fully saturated. Ideal for outdoor use — MeltBlown Mat provides quick, efficient cleanup to help protect the environment from contamination.

Absorbs Oily Liquids — Repels Water

MeltBlown polypropylene fibers are left in their natural hydrophobic state. These hydrophobic fibers repel water (and float) while only absorbing oils and other hydrocarbons.

High Sorbency Keeps Mat on the Job Longer

Large-diameter MeltBlown polypropylene fibers are randomly assembled to create a lofty Mat that absorbs high volumes of liquid fast.

Bright White Color Makes it Easy to See When Mat is Completely Saturated

Oily grunge can't hide on bright White MeltBlown Mat. Makes it easy to see when it's fully saturated — you save money by not throwing it away too soon.

 

Composition:

  • Polypropylene



This product helps you comply with:

Regulatory CitationSummary
29 CFR 1910.120(j)(1) Under an OSHA requirement,  "DOT-specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks, or ruptures may occur."
29 CFR 1910.1450(e) OSHA requires containment and cleanup materials for spills in laboratories to reduce occupational exposure to hazardous chemicals.
29 CFR 1910.22(a)(2) Floors in your workplace should be, "maintained in a clean and, so far as possible, a dry condition."
40 CFR 263.30(a) In the event of a spill, transporters must, "take appropriate immediate action to protect human health and the environment."
40 CFR 263.31 Transporters, "must clean up any hazardous waste discharge that occurs during transportation…so that the hazardous waste discharge no longer presents a hazard to human health or the environment."
49 CFR 173.3(c)(2) The area between a container and a salvage drum used for overpacking must have "sufficient cushioning and absorption material to prevent excessive movement of the damaged package and to eliminate the presence of any free liquid at the time the salvage drum is closed."




Oil-Only Static-Dissipative Pads

Oil-Only Static-Dissipative Pads
$19.99

Purchase

Foamboard Cutter

  • Converts between straight and bevel cutting
  • Adjustable blade depth
  • Ergonomic handle
  • On-board blade storage
  • Includes two blades
  • Compatible with any suitable straight-edge blade
  • Cuts up to 3/16"-thick pieces of foam

Economy and versatility are combined in the FoamWerks Foamboard Straight/Bevel Cutter. Simply rotate the angled base block and the foamcutter transforms from a straight cutter to a bevel cutter. Allows for easy, precision cutting that scissors or knives cannot duplicate.

Industrial Foam Hot Knife

  • Cuts styrofoam, plank, and soft foam
  • For custom-size packaging applications
  • Pre-heats in 15 seconds
  • Adjustable temperature control - up to 1000°F
  • 4" straight alloy blade included
  • 110 volt

This industrial cutting tool is specifically designed for foam cutting. Use it to cut custom foam shapes for tool shadowing, storage needs, and other applications in seconds. No more hassle from dull scissors or box knives; this foam hot knife ensures an accurate cut without the need for excessive pressure.

Heavy Duty Foam Hot Knife

  • 130W power
  • Adjustable cutting depth from 3-3/4" to 5-7/16"
  • Knife heats quickly for a quick, precision cut (max. temperature 840ºF)
  • Easy push-button activation
  • Auto-off feature
  • Includes a depth-adjusting sled
  • Overall dimensions: 13.5"L x 2.5"W x 4"H

This 130 watt, heavy-duty hot knife cuts foam, EIFS, ICF, nylon rope, webbing, synthetic fabric, and plastics. Use it for sculpting candles, foam, or other craft materials.

Unable to play video? Click here